SKU: BA-033

Smart PLC Trainer

- Provide Android-based Smart phone Application, Sequence Control
- Possible to be controlled and monitored directly from Smart phone
- Controlled by connected wireless network
- Set and control the Digital output of the equipment based on the environment of Smart phone Application in real-time
- Movable suitcase type

1) Android-based Smart phone Application, PLC Control
2) Radio Protocol : IEEE 802.11b/g/n Compatible
3) Supported Data Rates : 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
4) Modulation : DSSS and CCK
5) RF Operating Frequency : 2.4 ‾ 2.497GHz
6) Antenna Options : Chip antenna and U.FL connector for external antenna
7) Networking Protocols : UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
8) Power Consumption(Typical) : Standby = 34μA
Receive = 125mA, Transmit = 135mA
9) RF Output Power (Typical) : 8 ± 1dBm
10) Security Protocols : WEP, WPA/WPA2?PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
11) I/O Interface : UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
12) Logo display will be shown up when running on Smart phone After downloading the program
13) Automatically move to the Control screen if connected with device
14) Possible to set and control the Digital output of the equipment based on the environment of Smart phone Application in real-time
15) AVR BOARD ATmega128
16) 133 Powerful Instructions - Most Single Clock Cycle Execution
17) 32 x 8 General Purpose Working Registers + Peripheral Control Registers
18) Up to 16 MIPS Throughput at 16 MHz
19) On-chip 2-cycle Multiplier
20) 128K Bytes of In-System Self-programmable Flash program memory
21) 4K Bytes EEPROM
22) 4K Bytes Internal SRAM
23) Write/Erase cycles: 10,000 Flash/100,000 EEPROM
24) In-System Programming by On-chip Boot Program
25) Up to 64K Bytes Optional External Memory Space
26) JTAG (IEEE std. 1149.1 Compliant) Interface
27) Boundary-scan Capabilities According to the JTAG Standard
28) Two Expanded 16-bit Timer/Counters with Separate Prescaler, Compare Mode
29) Real Time Counter with Separate Oscillator
30) Input/Output Terminals
- Input Terminal: 16 points(8 points 1COM)
- Output Terminal: 6 points(8 points 1COM)
31) Digital I/O Simulator
- INPUT SWITCH : Toggle x 4ea, Push x 4ea
- Output Simulation Lamp(DC24V) : 8ea
32) AL Movable suit-case type


Contact Us


Int'l Calls: 0044 792 419 6687

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Our Manufacturer

Our Manufacturer

Follow Us