SKU: AC-336

Spectrum Analyzer

The Model AC-336 Spectrum Analyzer is a fully synthesized RF Spectrum Analyzer featuring simple user controls which
allow the novice or the seasoned expert to use the AC-336 right out of box.
It provides you with a powerful RF test and measurement tool for CDMA and WCDMA RF systems,
broadcast RF systems , ISM Band, Wireless LAN applications, EMI/EMC.
The features include 6.4" color display, centronics printer, internal memory, USB host, built in CDMA measurement
(ACP, Channel Power and Occupied Bandwidth).
This Spectrum Analyzer gives educational institutions, mobile and communication system manufactures and
RF product service centers a quality RF test instrument at an unbelievably affordable price
.

1- Frequency
       - Range : 9kHz to 6.2GHz
       - Resolution : Minimum 1Hz
       - Span Range
              . 100Hz/div to 600MHz/div
              . 1,2,5Steps Selection(Automatic), ZERO Span, FULL Span (9kHz to 6.2GHz)
       - Frequency Selection : Start, Stop, Center Span Setup
       - Span Accuracy : ±3% of the Indicated Span Width
       - Readout Accuracy : ≤ ±(Indicated Frequencyxreference
          Frequency Accuracy+Span x Span Accuracy+50% of RBW)
       - Phase Noise : ≤ -90dBc/Hz @10 kHz offset
2- Amplitude
       - Range : +20dBm~-105dBm
       - Average Noise Level(1 kHz RBW, 10Hz VBW)
              . ≤ -105dBm : 150kHz~2.7GHz
               . ≤ -100dBm : 2.7GHz~6.2GHz
       - Amplitude Unit : dBm, dBmV, dBμV, V, mV, μV, W, mW, μW
       - Display Scale Linearity
              . ≤ ±1.5dB/70dB(10dB/div), ≤ ±1.5dB/40dB(5dB/div)
              . ≤ ±0.5dB/8dB(1dB/div), ≤ ±0.5dB/16dB(2dB/div)
       - Frequency Response(based on 0dB Atten)
              . -3.5~1.5dB(100kHz~10MHz)
              . ±1.5dB(10MHz~6.2GHz)
       - Reference Level
              . Range : 20dBm~-90dBm
              . Resolution : 0.1dB
              . Accuracy : ±1.5dB
       - 2nd Harmonic Distortion : ≤ -60dBc, -40dBm input
       - Intermodulation Distortion : ≤ -70dBc, -40dBm Input
       - Residual Spurious : ≤ -85dBm(Input terminated, 0dB attenuation)
       - Other Input Spurious : ≤ -60dBc, -30dBm Input
       - Resolution Bandwidth
              . Selection : 1kHz, 3kHz, 10kHz, 30kHz, 100kHz, 300kHz, 1MHz, 3MHz, 9kHz, 120kHz
              . Accuracy : ±20%
              . Selectivity : 60dB/3dB Ratio < 15:1 60dB/6dB Ratio < 12:1(9kHz, 120kHz)
              . Switching Error : ≤ ±1.0dB(1 kHz Reference RBW)
       - Video Bandwidth : 10Hz to 3MHz in 1-3-10 Step
3- Sweep
       - Rate : 100 ms to 1000 Sec, 40 ms to 1000 Sec(Zero Span)
       - Accuracy : ≤ ±20%
       - Trigger Source : External(rear), Video, Freerun, Line
       - Trigger Modes : Continuous, Single
       - Trigger Level : TTL level
4- Screen Display
       - Type : 6.4" Color TFT LCD
       - Display Resolution : 640(H) x 480(V) active display area
       - Marker Mode
              . Peak Search, Delta Marker, Marker to Center
              . Marker to Reference(8 Markers Maximum)
5- Input
       - RF Input Connector : N type Female, 50 ohm Nominal
       - VSWR
              . 150kHz~3.0GHz : VSWR <1.5:1(based on 0 dBm Ref Level)
              . 3.0GHz~6.2GHz : VSWR < 2:1(based on 0 dBm Ref Level), Typical < 1.5:1
       - Maximum Input Level : 50 VDC, +20dBm
6- Memory
       - Trace Storage : Maximum 900 waveforms
       - Setup Storage : Maximum 3000 states
7- Standard(10MHz, Ref.)
       - Temperature Stability : ± 0.5ppm
       - Aging : ± 0.5ppm/Year
       - Connector : BNC Female
       - Input Level : -5dBm to +15dBm
       - Output Level : 10MHz, +8dBm Nominal
8- Interface
       - RS-232C : Null Modem for Remote Control
       - Printer
              . Driver : PCL Command, HP, EPSON, Laser-Jet, Desk-Jet
              . Connector : Standard 25 Pin female D-Sub using parallel connector
       - USB Host
              . Printer Drive : PCL Command, HP, EPSON, Laser-Jet, Desk-Jet
              . USB Storage Device : Supports 1.1 and 2.0, image file for storage, GIF format
       - Ethernet(Option)
              . 10-Base-T Ethernet : Supports Internet remote control
       - GPIB Interface(Option) : IEEE 488 bus


General Characteristics:
1- Dimension : 350(W) x 195(H) x 375(D)mm
2- Weight : 10kg
3- Warming up Time : 20 minutes for the precision measurement
4- Power
       - Source Voltage and Frequency : 100~240 VAC at 50/60Hz
       - Power Consumption : 80 Watts maximum without options
5- Operating Temperature : 0˚C to 40˚C
6- Storage Temperature : -20˚C to 70˚C
7- RF Emissions, Immunity
       - RF Emissions : EN 55011, FCC PART15 Section 15.101
       - RF Immunity : EN 61326.

Options
- GPIB Interface(IEEE 488 Bus)
- Ethernet Interface : for Internet Remote Control
- Soft Carrying Case<


Top

Contact Us

EDU MARKET Co.

Int'l Calls: 0044 792 419 6687

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Our Manufacturer

Our Manufacturer

Follow Us